Pax Rapid Connect Self Registration

The procedures below are required to register a new Pax device with Rapid Connect when the self-registration flag is not activated.

  1. Press “func+1” at same time
  2. Enter password for device (usually “1” or todays date, format is MMDDYear (example 08272017)
  3. Press Host settings
  4. Enter Password
  5. Press the down arrow in the middle at the bottom of the device
  6. Press Host register
  7. Press Activation or Self Register

If you receive an Authentication Error, ensue the following parameters are set by the ISO on the Nashville, Rapid Connect and Datawire platform.