Clover

Boarding with First Data Clover requires our eConduit application and a license for the service.  Below are the steps to enable the eConduit app direct from the Clover device.  Downloading requires admin access to the device.

Certified Devices:

  • Clover Mini
  • Clover Flex
  • Clover Station

Countries:

  • United States
  • Canada

Screen resolution:

  • Mini Gen 1 and 2 – 1280×800 (216dpi)
  • Flex – 720×1280 (320 dpi)

Download eConduit app directly on Clover Device

  • Log into Clover with admin password
  • Select “more tools app”
  • Type in “eConduit” in search bar in upper right hand corner
  • Select the app and approve installation
  • Once complete, click open to launch app

If successful and connected to internet, Clover will show “Connected” at bottom of screen

Important Pairing information/Serial Number: 

To pair Clover with an approved POS system, client must have a valid license of eConduit and their Clover serial number.  To obtain the serial number directly from the Clover, follow these steps.

  1. Hold finger on eConduit logo until screen changes
  2. Screen will change and show Clover serial number
  3. Write down Clover serial number and contact POS company for pairing instructions

Troubleshooting:  If the device is connected and unable to pair, confirm the serial number is correct.  During the eConduit download process, the eConduit app will also download one of the required companion apps (Cloud Pay Display or Secure Network Pay Display).  Confirm one of the two applications is also on the Clover device.

Clover devices

Our point-of-sale software runs on custom hardware for the best merchant experience. Since Clover’s devices are not Google Play certified and do not come with Google Play Services, applications are published through the Clover App Market. Most Android applications run unmodified unless the app depends on Google services not available in the Android Open Source Project (AOSP).

Clover Flex (2nd Generation)

Specifications:

  • Qualcomm Snapdragon 660 octa-core processor (4 cores up to 1.8GHz and 4 cores up to 2.2GHz)
  • Memory: 2GB RAM
  • Clover’s hardened version of Android (AOSP) 8.1 (API Level 27, Oreo)
  • 5″ IPS HD Display
  • Merchant-facing and customer-facing modes (both in portrait layout)
  • EMV chip card reader, NFC reader, and MSR reader
  • On-screen PIN entry (with a solution for the visually impaired)
  • Built-in 5MP camera for 1D and 2D trigger-activated barcode scanner with a dedicated external button for barcode. The camera is forward looking and landscape orientation.
  • Wi-Fi IEEE 802.11a/b/g/n/ac 1×1, 2.4GHz and 5GHz
  • North America (C043U): 4G/LTE only; Europe (C043E): 4G/LTE only; Argentina (C043L): 3G with 2G fallback
  • Internal thermal receipt printer
  • Speaker, audio jack, and microphone

More about Clover Flex (2nd Generation)

Clover Mini (2nd Generation)

The Clover Mini (2nd Generation) is a countertop device that can be used as a complete POS or in a customer-facing mode. It is designed to look identical to the original Clover Mini with improved performance.

Specifications:

  • Qualcomm SDA660 Processor
  • Clover’s hardened version of Android (AOSP) 8.1.0 (API Level 27, Oreo)
  • 7″, 1280×800 TVDPI display (216dpi) with Antimicrobial Corning® Gorilla® Glass
  • EMV chip card reader, NFC reader, and MSR reader
  • On-screen PIN entry (with solution for the visually impaired)
  • Front-facing camera for 1D and 2D barcode scanning
  • Ethernet, Wi-Fi, and AT&T-powered LTE (robust applications will assume partial connectivity)
  • Internal thermal receipt printer
  • Speaker, audio jack, and microphone

More about Clover Mini

Clover Station (2018)

Clover Station (2018) is our newest fixed-location device.

Specifications:

  • Qualcomm Snapdragon 810 octa-core CPU
  • Memory: 3GB RAM, 16GB ROM
  • Hardened ROM based on Android (AOSP) 7.0.0 (API Level 24, Nougat)
  • 14″ tablet with a 1920×1080 TVDPI display
  • EMV chip card and MSR readers
  • Two printer options:
    • Standard thermal receipt printer
    • Thermal receipt printer with 4.3″ customer-facing display and NFC reader
  • The device rotates between a merchant-facing position and a customer-facing position. The merchant-facing position is landscape, and the customer-facing position is portrait.
  • Front-facing camera for scanning 1D and 2D barcodes in either orientation
  • Ethernet, Wi-Fi, and Bluetooth 4.2 Low Energy (BLE) (robust applications will assume partial connectivity)
  • Up to four hours of integrated battery life for the tablet
  • Speaker and an audio jack with microphone input
  • Hub for cord management with support for four USB ports and two cash drawers
  • Support for existing USB peripherals, including Clover Mini and FD40 PIN Debit Pad

More about Clover Station (2018)

Clover Flex (1st Generation)

Specifications:

  • 1.6GHz Quad Core A7 processor
  • Memory: 1GB RAM, 8GB ROM
  • Clover’s hardened version of Android (AOSP) 5.1.1 (API Level 22, Lollipop)
  • 5″, 720×1280 TVDPI display (320ppi)
  • Merchant-facing and customer-facing modes (both in portrait layout)
  • EMV chip card reader, NFC reader, and MSR reader
  • On-screen PIN entry (with a solution for the visually impaired)
  • Built-in camera for 1D and 2D trigger-activated barcode scanner. The camera is forward looking and landscape orientation
  • Wi-Fi and 3G (robust applications will assume partial connectivity)
  • Internal thermal receipt printer
  • Speaker, audio jack, and microphone

More about Clover Flex

Clover Mini (1st Generation)

Clover Mini is a countertop device.

Specifications:

  • Quad-core Tegra 4 SoC
  • Clover’s hardened version of Android (AOSP) 4.4 (API Level 19, KitKat)
  • 7″, 1280×800 TVDPI display (216dpi) with Antimicrobial Corning® Gorilla® Glass
  • Merchant-facing and customer-facing modes (both in landscape layout)
  • EMV chip card reader, NFC reader, MSR reader
  • On-screen PIN entry (with a solution for the visually impaired)
  • Front-facing camera for 1D and 2D barcode scanning
  • Ethernet, Wi-Fi, and optional 3G (robust applications will assume partial connectivity)
  • Internal thermal receipt printer
  • Speaker, audio jack, and microphone

More about Clover Mini

Clover Mobile

Clover Mobile is a mobile device for on-the-go payment processing.

Specifications:

  • Quad-core Tegra 4 SoC
  • Clover’s hardened version of Android (AOSP) 4.4 (API Level 19, KitKat)
  • 7″, 1280×800 TVDPI display (216dpi) with Antimicrobial Corning® Gorilla® Glass
  • Merchant-facing and customer-facing modes (both in landscape layout)
  • Dedicated secure processor for payment interfaces
  • EMV chip card reader, NFC reader, MSR reader
  • On-screen PIN entry (with a solution for the visually impaired)
  • Trigger-activated 1D and 2D barcode scanner
  • Liquid silicone rubber bezel and handle base for soft landings
  • Wi-Fi, Bluetooth, and optional 3G (Robust applications will assume partial connectivity)
  • Optional charging dock
  • Optional Bluetooth thermal receipt printer
  • Speaker, audio jack, and microphone
  • 5140 mAh battery

Clover Station

Clover Station is a fixed-location device.

Specifications:

  • ROM based on (AOSP) 4.2.2 (API Level 17, Jelly Bean)
  • 11.6″, 1366×768 MDPI display (160dpi)
  • Rotates between a merchant-facing position and a customer-facing position. The merchant-facing position is landscape, and the customer-facing position is portrait.
  • Camera for scanning 1D and 2D barcodes in either orientation
  • Ethernet and wireless (802.11a/b/g/n) (robust applications will assume partial connectivity)
  • Magnetic stripe card reader. On Clover Station, all financial cards are encrypted. Non-financial cards cannot be read.
  • Thermal receipt printer
  • Speaker and an audio jack
  • Does not contain a microphone